Macclean water softener ns1001 how to#
Macclean water softener ns1001 install#
Macclean water softener ns1001 code#
Macclean water softener ns1001 series#

Then press and simultaneously and release. Step 1 Valve History (Step 1) Press Step 1 Step 2 and simultaneously for three seconds and release. Step 2 (Step 2) Days, since last regeneration: This display shows the days since the last regeneration occurred. To unlock press, NEXT,, and SET CLOCK in sequence, then press NEXT and simultaneously for 3 seconds. If screen in step does not appear in 5 seconds the lock on the valve is activated. Press REGEN to exit Installer Display Settings.ĭiagnostics Step 1 (Step 1) Press or simultaneously for three seconds. Note: The grains per gallon can be increased if soluble iron needs to be reduced. The default is 20 with value ranging from 1 to 150 in 1 grain increments. Step 2 (Step 2) Hardness: Set the amount of hardness in grains of hardness as calcium carbonate per gallon using the or buttons. SECTION 3: CONTROL VALVE PROGRAMMING AND REGENERATION Step 1 Installer Display Settings (Step 1) Press NEXT and simultaneously for 3 seconds. Should your life style require regular use of water during the 2:00 to 3:00 a.m. because at this time water consumption is generally minimal (a built-in hard water bypass does, however, permit water to be drawn during regeneration). NOTE: TIME OF REGENERATION is preset for 2:00 a.m.

When shifting to daylight saving time and (back), you may wish to adjust TIME OF DAY accordingly.

Macclean water softener ns1001 how to#

Refer to SECTION 3, as how to set control valve for the correct time of day.

Position DRAIN LINE over drain and secure firmly. TYPICAL DRAIN BYPASS OPERATION OFF NORMAL OPERATION Step 8. IN BYPASS VALVE OFF OFF OFF OFF BRINE LINE ELBOW INJECTOR COVER CONTROL VALVE BODY DRAIN LINE FLOW CONTROL ASSEMBLY Supply Water Enters Treated Water Exits OFF OFF OFF OFF Supply Water Enters Supply (Untreated) Water Exits OFF OFF OFF Figure 3.

Macclean water softener ns1001 code#

Check with local code officials prior to installation. OUT Some areas prohibit the use of flexible drain lines.

Macclean water softener ns1001 install#

Locate the parts package and install the bypass and adapter fittings on the control valve to facilitate the connection to the customer’s water supply. Ensure no freight damage has occurred since shipment from our manufacturing facility. Remove the unit from the shipping box and remove all packaging. SECTION 2: INSTALLATION IMPORTANT: Failure to follow instructions may void warranty. FILTER CHECK VALVE PRIMARY PRESSURE SWITCH. STANDARD WELL INSTALLATION WATER FOR LAWN SPRINKLERS OR OTHER HIGH DEMAND TREATED WATER TO 110 V OUTPUT SECONDARY PRESSURE PRIMARY SOLENOID VALVE PRESSURE TANK TANK BRINE TANK RAW WELL WATER SOFTENER SECONDARY PRESSURE SWITCH. SECTION 2: INSTALLATION TREATED WATER PRESSURE TANK BRINE TANK RAW WELL WATER SOFTENER FILTER PRESSURE SWITCH. 5) DO NOT install the softener in a location where freezing temperatures occur. IF PRESSURE IS OVER 100 PSI (689 kPa), A PRESSURE REDUCING VALVE MUST BE INSTALLED IN THE WATER SUPPLY LINE AHEAD OF THE WATER SOFTENER. When properly installed, your new softener will provide many years of virtually trouble-free service.ĬHECK YOUR WATER PRESSURE AND PUMPING RATE: Two water system conditions must be checked carefully to avoid unsatisfactory operation or equipment damage: 1) MINIMUM water pressure required at the water softener inlet is 20 psi (138 kPa). TABLE OF CONTENTS SECTION 1 2 3 4 5 6 7 8 DESCRIPTION BEFORE INSTALLATION INSTALLATION CONTROL VALVE PROGRAMMING & REGENERATION MAINTENANCE UNIT & CONTROL VALVE SERVICE & TROUBLESHOOTING SPECIFICATIONS & OPERATING DATA PARTS LIMITED WARRANTY IMPORTANT: SECTION 1: BEFORE INSTALLATION Congratulations! We believe your purchase of this water softener will prove to be a very wise choice.

Macclean water softener ns1001 series#

Intended Use: The CUNO MCWS/CWS Series Residential Water Softener is intended for use in softening water in homes and has not been evaluated for other uses. Retain these instructions for future reference. SAFETY INFORMATION Read, understand, and follow all safety information contained in these instructions prior to installation and use of the CUNO MCWS/CWS Series Residential Water Softener. The installer should take appropriate measures to prevent a vacuum. INSTALLATION AND OPERATING INSTRUCTIONS MCWS/CWS SERIES RESIDENTIAL WATER SOFTENER TWO TANK MODELS: MCWS075ME MCWS100ME MCWS150ME MCWS200ME MCWS300ME CWS075ME CWS100ME CWS150ME CWS200ME CWS300ME CAUTION: Damage to the system can occur (including possible mineral tank structure failure resulting in a water leak), if system is subjected to a vacuum.